Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

WEEKEND ROLL CALL ! What do you have planned?
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=46114		 Page 1 of 1
Author:  LanceK [ Fri Jul 31, 2015 8:14 am ]
Post subject:  WEEKEND ROLL CALL ! What do you have planned?
I am going to be installing the second window in my new barn. Trimming them both out.
Cutting out a encroaching tree that is taking over our back yard and finally doing 50 bales of hay for the girls horses. Does not look like I will see the inside of my shop until next week.
Author:  SteveSmith [ Fri Jul 31, 2015 8:17 am ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
More mandolin finishing here. I'm really liking this Royal Lac.
Author:  Brianloco [ Fri Jul 31, 2015 8:44 am ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Probly putting in frets and shaping the body on the electric I'm working on


Sent from my iPhone using Tapatalk
Author:  alan stassforth [ Fri Jul 31, 2015 9:11 am ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Over to Yosemite to scatter ma's ashes.
Haven't been there for 40 years!
Author:  tysam [ Fri Jul 31, 2015 10:33 am ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Bracing on an all mahogany GA
Author:  Colin North [ Fri Jul 31, 2015 11:10 am ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Family visit and start on my spray shop.
Author:  meddlingfool [ Fri Jul 31, 2015 11:47 am ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
I'm turning the lights off and going fishing.
Author:  Doug Balzer [ Fri Jul 31, 2015 2:05 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
After a month in Thailand I'm getting back to finishing up two guitars whose finish cured while away.
Author:  LanceK [ Fri Jul 31, 2015 2:16 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Doug Balzer wrote:
After a month in Thailand I'm getting back to finishing up two guitars whose finish cured while away.


Doug, work or play in Thailand? Sounds awesome.
Author:  Doug Balzer [ Fri Jul 31, 2015 2:18 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
LanceK wrote:
Doug Balzer wrote:
After a month in Thailand I'm getting back to finishing up two guitars whose finish cured while away.


Doug, work or play in Thailand? Sounds awesome.


Some work and lots of play. Glad my wife and two teenage sons could join me!
Author:  LanceK [ Fri Jul 31, 2015 2:30 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Doug Balzer wrote:
LanceK wrote:
Doug Balzer wrote:
After a month in Thailand I'm getting back to finishing up two guitars whose finish cured while away.


Doug, work or play in Thailand? Sounds awesome.


Some work and lots of play. Glad my wife and two teenage sons could join me!


What a great opportunity for your family!
A bucket list trip for me is to visit Angkor Wat.
Not sure if I will ever make it but I sure would love too.
Author:  johnparchem [ Fri Jul 31, 2015 2:41 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
I love traveling in Thailand!

Not this weekend, I am in the final construction stages getting ready to finish a Walnut\Spruce 00. I bought the Claro Walnut in the classified here.

Image

Image

Image
Author:  LanceK [ Fri Jul 31, 2015 2:59 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
John, what are you using for your dust collection ducting? Is that regular heat/air ducts? If it is, what type of collector are you using? I have considered this for my CV Max. Its 5 HP 220.
Author:  jfmckenna [ Fri Jul 31, 2015 3:59 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
My wife has been gone for the last three weeks and is driving home Sunday with her mom, two days drive. So I have two days to clean the house :D

Other then that I have two Hercules wall hangers to mount and lots more work to do before launching the new shop end of August.
Author:  johnparchem [ Fri Jul 31, 2015 4:05 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
LanceK wrote:
John, what are you using for your dust collection ducting? Is that regular heat/air ducts? If it is, what type of collector are you using? I have considered this for my CV Max. Its 5 HP 220.


Yes that is regular ducting the I am using on my 5 HP/220 Clear Vue system. I have the clear view mounted in a separate closet to cut down on the noise. I love the system.
Author:  Ken Lewis [ Fri Jul 31, 2015 8:20 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Lance and John
A lot of the heating and ventilation duct pipe is 28 and 30 guage. Too slight IMO as it will collapse
if all blastgates get closed. I have a similar homebuilt 5hp system and use 26 guage, though harder to find, it can withstand the suction with all gates closed, I think! Curious as to guage of yours though John.
Ken
Author:  johnparchem [ Fri Jul 31, 2015 8:31 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
I will try to find out the gauge, mine has the reinforced spirals and seems rigid. I often have all of the gates closed with no catastrophic effect. I never thought the vacuum in these systems were real high in terms of millibars but rather that they moved a lot of air.
Author:  Michaeldc [ Sat Aug 01, 2015 2:18 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
I had planned to finish nailing this together today. It will be raffled off to support the Puget Sound Guitar Workshop (PSGW.org) scholarship program. This will be our third year doing this. Time to start packing!!

Specs: Sitka top, Black limba B&S, 25" scale, 00, 14 fret, Manzer wedge.
Author:  Mike OMelia [ Sat Aug 01, 2015 10:42 pm ]
Post subject:  Re: WEEKEND ROLL CALL ! What do you have planned?
Peg heads and bridges. 6 bodies in progress. 5 bridges and I'm done with fabricating. On to final fit and finish
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/